Add Ipx Route <Ipx_Net_Address; Add Ipx Service [Service_Name - 3Com OfficeConnect Remote 812 Cli User's Manual

Release 1.0
Hide thumbs Also See for OfficeConnect Remote 812:
Table of Contents

Advertisement

B-4
A
B: CLI COMMAND DESCRIPTION
PPENDIX
add ipx route
<ipx_net_address>
add ipx service
[service_name]
Adds an IPX network to the list of IPX networks available over the specified
interface.
Parameters
Description
<network_name> Name of IPX network. A unique ASCII string of up to 32 characters; space
must be surrounded by double quotes.
address
Address of the IPX network.
interface
Name of the interface with which this IPX network is to be associated. The
default is the first LAN interface (eth:1).
enabled
Optional parameter indicates whether the network is enabled (YES) or
disabled (NO) by this command. YES is the default.
frame
Frame encapsulation chosen for this IPX network.
gateway [ipx_host_address]

metric [metric_number]

ticks [tick_number]

Adds an IPX static route (for the LAN) to the system's IPX Route table, which
defines static routes to remote IPX networks. The command list ipx routes displays
currently defined static routes.
Parameters
Description
<ipx_net_address>
IPX network address requiring a route.
gateway
IPX address of the host which will act as a gateway. The format is
nnnn.xx:xx:xx:xx:xx:xx (net_addr.mac_address).
metric
Number of "hops" through different routers needed to reach the remote
IPX network.
ticks
Estimated interval in ticks it takes to deliver a packet to the remote
network. There are approximately 18 ticks per second.
address [internal network number]

gateway [network_number.mac_address]

metric [metric]

node [internal_node_number]

socket [socket_number]

type [service_type]

Adds a static IPX service (for the LAN) to the IPX services table. You must supply
the name, internal ipx network number, node number, socket, and type of service
for this service. The user must also supply gateway information to indicate the
next router hop. To remove this service, use the delete ipx service command.
Parameters
Description
service name
Designation of IPX service.
address
Internal network number for the IPX service on which this service resides.
Gateway
Address of the router you defined as the gateway.
metric
An integer representing how far away the default router is, in "hops" through
other routers. Values: 1-15.

Advertisement

Table of Contents
loading

Table of Contents