Fpga Mezzanine Card Interface; Fmc+ Connector Type - Xilinx VCK190 Series User Manual

See the HDMI Transmitter and Receiver Subsystem Answer Record 70514
references.
For more details on the TI SN65DP159RGZ and TMDS181 HDMI retimers, see the component
data sheets on the
component data sheet on the
The detailed ACAP connections for the feature described in this section are documented in the
VCK190 board XDC file, referenced in
GTY201 – GTY203: FMCP1 and GTY203 – GTY206: FMCP2

FPGA Mezzanine Card Interface

[Figure 3, callout 20 and 21]
The VCK190 evaluation board supports the VITA 57.4 FPGA mezzanine card (FMC+ or FMCP)
specification by providing a subset implementation of the high pin count connectors at J51
(FMCP1) and J53 (FMCP2). FMC+ connectors use a 14 x 40 form factor, populated with 560
pins. The connector is keyed so that a mezzanine card, when installed on the VCK190 evaluation
board, faces away from the board.
The FMCP1 DP[0:11] are connected across ACAP U1 GTY201-GTY203. The FMCP2 DP[0:11]
are connected across ACAP U1 GTY204-GTY206. The FMCP1 and FMCP2 LA[0:33] bus and
differential CLK pairs are connected across the banks 706, 707, and 708 triplet.
The detailed ACAP connections for the feature described in this section are documented in the
VCK190 board XDC file, referenced in

FMC+ Connector Type

The Samtec SEAF series, 1.27 mm (0.050 in) pitch mates with the SEAM series connector. For
more information about the SEAF series connectors, see the
The 560-pin FMC+ connector defined by the FMC specification (see
FMCP Connector
• 160 single-ended or 80 differential user-defined signals
• 24 transceiver differential pairs
• 6 transceiver (GBTCLK) differential clocks
• 4 differential (CLK) clocks
• 1 differential (REFCLK) clock (both C2M and M2C pairs)
• 1 differential (SYNC) clock (both C2M and M2C pairs)
UG1366 (v1.0) January 7, 2021
VCK190 Board User Guide
Texas Instruments website. For more details on the IDT 8T49N241, see the
Integrated Device Technology,
Appendix B: Xilinx Design
Appendix B: Xilinx Design
Pinouts) provides connectivity for up to:
Chapter 3: Board Component Descriptions
for HDMI-compliant
Inc. website.
Constraints.
Constraints.
Samtec, Inc. website.
Appendix A: VITA 57.4
Send Feedback
www.xilinx.com
58