SECTION 1
1.3 General Safety Information
WARNING
!
WARNING
!
Machinery often starts automatically.
This equipment moves in various directions and
speeds.
Moving machinery can crush.
•
Only qualified personnel should operate or
•
service this power source.
Keep all personnel, materials, and
•
equipment not involved in production
process clear of entire system area.
Fence off entire work cell to prevent
•
personnel from passing through area or
standing in the working envelope of the
equipment.
Post appropriate WARNING signs at every
•
work cell entrance.
Follow lockout procedure before servicing
•
any equipment.
Failure to follow operating instructions
could result in death or serious injury.
Read and understand this operator's manual
before using machine.
•
Read entire procedure before operating or
performing any system maintenance.
•
Special attention must be given to all hazard
warnings that provide essential information
regarding personnel safety and/or possible
equipment damage.
•
All safety precautions relevant to electrical
equipment and process operations must be
strictly observed by all having system
responsibility or access.
•
Read all safety publications made available
by your company.
SAFETY
1-3