ESAB B Series Installation, Operation And Maintenance Manual page 13

SECTION 1
1.7 Service Precautions
WARNING
!
WARNING
!
Hazardous voltages. Electric shock
can kill.
Do NOT touch plasma torch, cutting table or
•
cable connections during plasma cutting
process.
Always turn power off to plasma power
•
supplies before touching or servicing plasma
torch.
Always turn power off to plasma power
•
supplies before removing covers or panels to
service any system component.
Do not touch live electrical parts.
•
Keep all panels and covers in place when
•
machine is connected to power source.
• Keep gloves, shoes, clothing, work area,
and equipment dry.
•
Inspect power and ground leads cables for
wear or cracking. Replace worn or damaged
cables. Do not use if damaged.
• Never bypass safety interlocks.
•
Follow lock-out procedures.
Hot Torch can cause skin burns.
Allow torch to cool before servicing.
SAFETY
1-9