Mounting and dismantling
4.4 Installing, mounting and removing the 3RW5 HMI
Make sure that the locking switch on the rear of the 3RW5 HMI Standard is in the
required position.
You will find further information in chapter Standard 3RW5 HMI (Page 149).
Insert the push-in lugs into each side of the enclosure until you hear them engage
fix the 3RW5 HMI Standard on the wall
Result
You have installed the 3RW5 HMI Standard on a flat surface and can commission it.
72
/
.
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
and
SIRIUS 3RW52 Soft Starter