Table of Contents
Advertisement
6.6
RESET MODE
Effects of RESET MODE
Setting of the RESET MODE will only affect acknowledgment response of the motor
overload protection.
You will find more information in chapter Faults and remedial actions of the
3RW52 soft starter (Page 176) with the comment "Depends on parameter RESET MODE".
Manual RESET
"Manual RESET" means that the following options are available for acknowledging faults:
Remote RESET
"Remote RESET" means that faults are acknowledged by switching the power supply
(control supply voltage) off and on again. The power supply (control supply voltage) on the
3RW52 soft starter must be switched off for at least 4 seconds.
Auto RESET
"Auto RESET" means that faults are automatically reset as soon as the cause is eliminated.
SIRIUS 3RW52 Soft Starter
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
RESET / TEST Key on the 3RW52 soft starter
RESET / TEST Key on the 3RW5 HMI Standard (accessory)
Reset via bus interface (accessory)
Reset via F key on 3RW5 HMI High Feature (accessory)
Reset via 3RW5 HMI High Feature (accessory) (Diagnosis state)
Parameter assignment
6.6 RESET MODE
105
Advertisement
Table of Contents
