Table of Contents
Advertisement
3.11.4
3RW5 HMI
3RW5 HMI Standard
The 3RW5 HMI Standard can be used to monitor and control (motor ON / OFF) and the
3RW52 soft starter. The 3RW5 HMI Standard can be installed in the 3RW52 soft starter or in
the control cabinet door or mounted on a wall using accessories. The 3RW5 HMI Standard
has an LCD with red display illumination, LEDs for status display, and function and control
keys.
Functions
SIRIUS 3RW52 Soft Starter
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
Any changes of setting elements will be indicated immediately in the display.
Error diagnostics are output as error numbers (Faults and remedial actions of the
3RW52 soft starter (Page 176)).
Acknowledgment of faults and execution of user tests via the RESET / TEST key
Starting and stopping the motor via control keys
Switching modes via the LOCL/REMT (LOCAL / REMOTE) key.
PROFIBUS station address setting
Modbus RTU station address setting
Display of the device LEDs of the 3RW5 HMI Standard shows the messages of the
following devices:
– 3RW52 soft starter
– 3RW5 HMI Standard
– Communication module (if there is one)
Description
3.11 Accessories
51
Advertisement
Table of Contents
