Siemens SIRIUS 3RW52 Equipment Manual page 254

Glossary
Process image
Image of the signal states of the digital inputs and outputs in the memory of a controller.
The process images can be transferred as follows:
Cyclically in the fieldbus protocol
Acyclically using data sets
Remote RESET
"Remote RESET" means that faults are acknowledged by switching the power supply
(control supply voltage) off and on again. The power supply (control supply voltage) on the
3RW52 soft starter must be switched off for at least 4 seconds.
STS
Simulation Tool for Soft Starters
The soft starter can be configured with the STS (Simulation Tool for Soft Starters) software.
The STS suggests suitable soft starters for the application based on the motor and load data
and application requirements that you enter.
254
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
SIRIUS 3RW52 Soft Starter