Installing, Mounting And Removing The 3Rw5 Hmi; Installing The Standard 3Rw5 Hmi In 3Rw52 Soft Starter - Siemens SIRIUS 3RW52 Equipment Manual

Mounting and dismantling

4.4 Installing, mounting and removing the 3RW5 HMI

4.4 Installing, mounting and removing the 3RW5 HMI
4.4.1

Installing the Standard 3RW5 HMI in 3RW52 soft starter

Requirements
3RW5 HMI Standard (accessory)
HMI connecting cable, 0.1 m (accessory)
Hinged cover for 3RW52 with cutout for 3RW5 HMI Standard (accessory) or Cut out the
hinged cover for 3RW5 HMI (Page 75)
Procedure
NOTICE
Material damage caused by electrostatic charge.
Note the information in chapter ESD Guidelines (Page 15).
Illustration similar
Make sure that the locking switch on the rear of the 3RW5 HMI Standard is in the
required position.
You will find further information in chapter Standard 3RW5 HMI (Page 149).
Observe the coding of the plug and socket
Lock the connector in the socket
58
/ .
.
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
SIRIUS 3RW52 Soft Starter