Safety And Instructional Decals - Toro 34230 Operator's Manual

Safety and Instructional Decals

•
Keep all safety signs legible. Remove all grease,
dirt, and debris from safety signs and instructional
labels.
•
Replace all worn, damaged, or missing safety
signs.
•
When you install replacement components, ensure
that current safety signs are affixed to those
components.
•
If you have installed an attachment or accessory,
ensure that current safety signs are visible.
•
Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your machine.
1. Pull lever up to disengage
the brake.
1. Cutting/dismemberment hazard—keep away from moving
parts.
133-8062
126-2620
2. Push lever down to
engage the brake.
1. Main Fuse, 20A
2. Regulator, 20A
decal133-8062
decal126-2620
1. Unlock to push machine.
2. Read the instructions
before servicing or
performing maintenance.
126-4994
2. Warning—do not use the upper front locations as tie down
points, only use the specified tie-down points; see the
Operator's Manual for location.
5
135-6949
3. Start relay
4. GND-Shutdown Relay
126-2621
3. Lock to drive machine.
decal135-6949
decal126-2621
decal126-4994