Before Operation; Before Operation Safety - Toro 34230 Operator's Manual

Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Evaluate the terrain to determine what accessories
and attachments are needed to properly and
safely perform the job. Use only accessories and
attachments approved by Toro.
•
Inspect the area where you will use the equipment,
and remove all rocks, toys, sticks, wires,
bones, and other foreign objects that may be
contaminated by chemicals and/or affect the
stability of the machine.
•
Wear appropriate clothing, including safety
glasses, substantial slip-resistant footwear, and
hearing protection. Tie back long hair and avoid
loose clothing or jewelry that may get tangled in
moving parts.
•
Do not operate the machine while people,
especially children, or pets are in the area. Stop
the machine and the attachment(s) if anyone
enters the area.
•
Do not fill, calibrate, or clean the machine while
people, especially children, or pets are in the area.
•
Check all sprayer components for wear and leaks
before applying pressure to the system. Do not
use the machine if it is leaking or damaged.
•
Ensure that the operator platform is clean and free
from chemical residue and debris buildup.
•
Check that the operator-presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly. Frequently check for
worn or deteriorating components and replace
them with the manufacturer's recommended parts
when necessary.
Chemical Safety
Chemical substances used in the spreader-sprayer
system may be hazardous and toxic to you,
bystanders, animals, plants, soils or other property.
•
Carefully read and follow the chemical warning
labels and Safety Data Sheets (SDS) for all
chemicals used and protect yourself according to
the chemical manufacturer's recommendations.
Ensure that as little skin as possible is exposed
while using chemicals. Use appropriate personal
protective equipment (PPE) to guard against
personal contact with chemicals, such as the
following:
– safety glasses, goggles, and/or face shield
– chemical-resistant gloves
– rubber boots or other substantial footwear
– hearing protection
– respirator or filter mask
– clean change of clothes, soap, and disposable
towels, to be kept on-hand in the event of a
chemical spill
•
If you are using more than 1 chemical, read the
information about each chemical. Refuse to
operate or work on the spreader-sprayer if this
information is not available.
•
Before working on a spreader-sprayer system,
ensure that the system has been triple rinsed and
neutralized according to the recommendations
of the chemical manufacturer(s) and that all the
valves have been cycled three times.
•
Verify there is an adequate supply of clean water
and soap nearby, and immediately wash off any
chemicals that contact you.
•
Obtain proper training before using or handling
chemicals.
•
Use the correct chemical for the job.
•
Follow the chemical manufacturer's instructions
for the safe application of the chemical and do
not exceed the recommended system application
pressure.
•
Handle chemicals in a well-ventilated area.
•
Have clean water available, especially when filling
the spray tank.
•
Do not eat, drink, or smoke while working with
chemicals.
•
Do not clean spray nozzles by blowing through
them or placing them in your mouth.
•
Always wash your hands and other exposed areas
as soon as possible after finishing the work.
•
Keep chemicals in their original packages and in a
safe location.
•
Properly dispose of unused chemicals and
chemical containers as instructed by the chemical
manufacturer and your local codes.
•
Chemicals and fumes are dangerous; never enter
the tank or hopper, and do not place your head
over or in the opening.
•
Follow all local, state, and federal requirements for
spreading and spraying chemicals.
17