Engine Controls - Toro 34230 Operator's Manual

Engine Controls

1. Ignition switch
2. Choke
Ignition Switch
The ignition switch is located at the left side of the
control console (Figure
Use the ignition switch to start and run, or shut off the
engine. The ignition switch has 3 positions: S
R and S .
UN TART
Note:
You must engage the parking brake to start
the engine.
Choke Control
The choke control is located at the left side of the
control console; you use it to help start a cold engine
(Figure 8).
Note:
Do not start or run a warm engine with the
choke in the O position.
N
•
Pull up on the choke control to set the choke to
the O position.
N
•
Push down on the choke control to set the choke
to the O position.
FF
Throttle Control
The throttle control (the red lever) is located at the left
side of the control console
Hour Meter (Sprayer and Information Display)
The hour meter displays in the sprayer and information
display is located to the right of the throttle, at the
bottom of the control console
Figure 8
3. Throttle
4. Engine hour meter
(sprayer and information
display)
8).
(Figure 8).
(Figure 8).
The hour meter records the number of hours that the
machine has operated. Hour meter time displays
when the key is in the run position and the sprayer
control switch is shut off.
Fuel-Shutoff Valve
The fuel-shutoff valve is located at the front, right side
of the engine below the fuel tank
Note:
Close the fuel-shutoff valve when you do not
use the machine for a few days, transport the machine
to and from the job site, or park the machine inside a
building.
g304856
1. Fuel-shutoff valve (right side of the engine)
,
TOP
12
(Figure 9).
Figure 9
g248833