KYMCO UXV500I Repair Manual page 1197

8.Final Drive UXV 500i/700i
Install a new circlip. Grease the right drive shaft splines. Install the right drive shaft
horizontally.
Note: Be careful not to damage the oil seals in the rear gear case. After installing check the
circlip is seated properly by pulling the case side joint lightly.
Install the rear suspension arms and knuckles. See the Rear Suspension Arms topic for
more information.
Install the shock absorbers. See the Rear Shock Absorbers topic for more information.
Fill the final drive gear oil. See the Final Drive Oil topic for more information.
Install the rear wheels and hubs. See the Wheels and Wheel Hubs topic for more
information.
Adjust the rear parking brake. See the Rear Parking Brake Adjustment topic for more
information.
8-36