KYMCO UXV500I Repair Manual page 1384

10.Wheels UXV 500i/700i
Apply lightweight lithium-soap base grease to the lips of the new dust seals Install the dust
seasl with a suitable driver with the same outside diameter as the seal.
Special Tool-
Oil Seal and Bearing Driver: A120E00014
Installation
Install the steering knuckle. See the Steering Knuckles topic for more information.
Install the front wheels and hubs. See the Wheels and Wheel Hubs topic for more
information.
Check the toe-in. See the Toe-In Adjustment topic for more information.
Rear Bearings
Remove the rear wheels and hubs. See the Wheels and Wheel Hubs topic for more
information.
Remove the shock absorbers. See the Rear Shock Absorbers topic for more information.
Remove the rear knuckle. See the Rear Suspension Arms topic for more information.
10-33