KYMCO UXV500I Repair Manual page 1139

7.CVT Continuously Variable Transmission
Lubricate the threads of the drive pulley nut with oil. Install the drive pulley washer and nut
onto the drive pulley shaft. The OUTSIDE mark on the washer must face out as shown.
Hold the drive pulley with a drive pulley holder tool and tighten the nut to specification with a
26 mm socket.
Special Tool - Drive Pulley Holder: A120E00058
ITEM THREAD SIZE AND TYPE
DRIVE FACE M20 x 1.0
UXV 500i/700i
TORQUE VALUES
REMARKS
N-m ft-lb
137.2 101.2 APPLY OIL
7-103