KYMCO UXV500I Repair Manual page 1118

7.CVT Continuously Variable Transmission UXV 500i/700i
Driven Pulley Disassembly
A driven pulley spring compressor is needed to disassembly the driven pulley.
Special Tool -
Driven Pulley Spring Compressor: A120E00059
Fit the driven pulley onto the special tool. Fit the posts on the tool into the holes as shown.
Place the special tool in a vise. Note the wrench of the special tool. Turn in the nut to
compress the spring. The nut must have enough room to come free.
7-82