7.CVT Continuously Variable Transmission
UXV 500i/700i
When turning the clutch outer clockwise, the clutch outer should turn freely. If not, the
one-way clutch assembly is faulty and should be replaced.
When turning the clutch outer counterclockwise, the clutch outer and crankshaft should
engaged by the one-way clutch. If not, the one-way clutch assembly is faulty and should be
replaced.
Remove the one-way clutch and replace it as needed.
Install the clutch outer to the crankshaft with without the clutch and collars. When turning
the clutch outer clockwise or counterclockwise, the clutch outer should turn smoothly. If not,
the needle bearing or the clutch outer is damaged. Inspect these components.
7-112