Prior To Entries; Preparations For Entries; Receipt And Journal Paper Rolls; Receipt On/Off Function - Sharp UP-600 Instruction Manual

3

Prior to Entries

Preparations for Entries

Receipt and journal paper rolls

If the receipt and journal paper rolls are not set in the machine or there are low rolls, install new ones
according to section "Installing and Removing the Paper Rolls" under "Operator Maintenance."

Receipt ON/OFF function

You can disable receipt printing in the REG mode to save paper using the receipt function. To disable
receipt printing, press the
function is in the OFF status, the receipt off indicator "R" is highlighted.
Your register will print reports regardless of the receipt state. This means that the receipt roll
NOTE
must be installed even when the receipt state is "OFF".

Cashier assignment

Prior to any item entries, a cashier must enter his/her cashier codes into the POS terminal. Follow the
procedure shown below.
To sign on:
To sign off:
CASH
#
• If another cashier is signed on while a cashier is signed on, the latter will automatically be
NOTE
signed off.
• If you want to enter a cashier code before every transaction, consult your authorized SHARP
dealer.
• Your POS terminal can provide the cashier + clerk system or the clerk only system instead of
NOTE
current system (cashier only system). If you want to change the system, please consult your
authorized SHARP dealer.
Clerk assignment
To sign on:
To sign off:
20
key and select RCP SW. from the menu to select an option, OFF. When the
Cashier code CASH
#
CASH through CASH
1 10
Clerk code
CLK CLK
through
1 10
(In case of secret code is 0000)
Secret code CASH
#
(In case of secret code is 0000)
Secret code