R/J Printer (Built-In Printer); Slip Printer - Sharp UP-600 Instruction Manual

R/J printer (Built-in printer)

Procedure

Slip printer

Procedure
Program each item as follows:
• AUTO CUTTER (Use the selective entry)
Auto cutter function
YES: Enables auto cutter function.
NO: Disables auto cutter function.
• LIGHT&SHADE (Use the numeric entry)
Select a light and shade level. (00 to 99)
00: 78% for standard
50: 100% <standard>
99: 111% for standard
• IMAGE FOOT (Use the selective entry)
PRINT: Prints footer graphic logo.
NOT PRINT: Not print footer graphic logo.
• RCPT LENGTH (Use the numeric entry)
Minimum length for bill on receipt (0 to 30)
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter "0" for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as "0", no RS-232 channel is assigned.
• PRINTER (Use the selective entry)
Select the printer to be used.
EPSON TM-295
EPSON TM-T88(2)
• INITIAL FEED# (Use the numeric entry)
Initial line feed for a slip (0 to 64 lines)
• SLIP MAX LINE (Use the numeric entry)
Maximum number of lines printable on a slip (0 to 99)
• VP PRINT TIMES (Use the numeric entry)
Number of times of validation printing (0 to 9)
EPSON TM-T88/85
EPSON TM-210
161