Personnel Programming; Clerk - Sharp UP-600 Instruction Manual

Personnel Programming

Use the following procedure to select any option included in the personnel group:
Procedure
The following illustration shows those options included in the personnel programming group.
7 PERSONNEL

Clerk

Please kindly take note to make "Clerk" programming instead of Cashier programming even
NOTE
when "cashier only" system is applied to your POS terminal.
In case that "cashier + clerk" system is applied to your POS terminal, data except CODE, NAME
and KEY No. are not effective.
Procedure
The screen continues.
142
1.
From the SETTING menu, select "7 PERSONNEL."
• The PERSONNEL menu will appear.
2.
Select any option from the following options list:
1 CLERK:
2 CASHIER:
1 CLERK
2 CASHIER
Program each item as follows:
• SECRET CODE (Use the numeric entry)
Secret code (max. 4 digits: 0001 to 9999/0000)
• NAME (Use the character entry)
Name for the clerk. Up to 12 characters can be entered.
NOTE
In case of "cashier only system", please note that "CLERK0001" through
"CLERK0099" will appear as the factory-set names.
• KEY No. (Use the numeric entry)
Key number (0 through 255)
• SUPERVISOR (Use the selective entry)
Always enter "NO".
Please never change the default setting. This setting is only for the
machine that has real clerk key system.
Clerk
Cashier
See "Clerk" on page 142.
See "Cashier" on page 144.