Remote Printer (Kp#1 Through - Sharp UP-600 Instruction Manual

Remote printer (KP#1 through KP#9)
Procedure
The screen continues.
• AUTO CUTTER (Use the selective entry)
Auto cutter function
YES: Enables auto cutter function.
NO: Disables auto cutter function.
• PAPER SHEET (Use the selective entry)
Select a paper type.
TWO: Uses two or more sheets.
ONE: Uses one sheet.
• PRINT TYPE (Use the selective entry)
Select the type of receipt print formats.
ADDITION: Addition
S/D: Single/Double
ADD+S: Addition + Single
D ADD.: Double addition
D ADD+S: Double addition + Single
• SECOND KP (Use the numeric entry)
You can assign a second remote printer to which data should be output when the first remote printer
encounters an error during transmission of the data.
Second remote printer number (0 to 9)
• NAME (Use the character entry)
Description for the remote printer (max. 12 characters)
• INITIAL FEED# (Use the numeric entry)
Initial line feed for a remote printer (0 to 64)
162
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter "0" for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as "0", no RS-232 channel is assigned.
• PRINTER (Use the selective entry)
Select the printer to be used.
BUILT-IN (Built-in printer)
EPSON TM-T88/85
EPSON TM-U210
EPSON TM-T88(2)