Stacked Report - Sharp UP-600 Instruction Manual

Stacked report

Your POS terminal is equipped with the stacked report printing function that enables multiple X/Z reports to
be printed in sequence with a single request.
Procedure
Select a stacked report
no. from the stacked
reports list.
When you are allowed to
set the parameter of a
report, the following
window will appear.
You can select a maximum of twenty reports from the stacked reports list.
Some reports can be set their parameters such as "START CODE" and
"END CODE."
• 01 GENERAL
General report
• 02 DEPT./GROUP (Use the numeric entry)
Full department report
Parameter: Starting department code/ending department code (1
through 99)
• 03 DEPT.GR. TOTAL
Full group total report on departments
• 04 PLU (Use the numeric entry)
PLU report by designated range
Parameter: Starting PLU code/ending PLU code
(1 through 999999)
• 05 COMBO SALES (Use the numeric entry)
Combo sales report
Parameter: Starting PLU code/ending PLU code
(1 through 999999)
• 06 PLU GR. TOTAL
Full group total report on PLUs
• 07 PLU STOCK (Use the numeric entry)
PLU stock report
Parameter: Starting PLU code/ending PLU code
(1 through 999999)
• 08 PLU MIN. STOCK (Use the numeric entry)
PLU minimum stock report
Parameter: Starting PLU code/ending PLU code (1 through 999999)
• 09 PLU ZERO SALES (Use the selective/numeric entry)
PLU zero sales report
Parameter: 1 ALL/2 BY DEPT.
When "2 BY DEPT." is selected, enter a department code (1 through
99).
• 10 PLU CATEGORY (Use the numeric entry)
PLU/EAN by price category
Parameter: Starting price/ending price
• 11 TRANSACTION
Transaction report
• 12 TL-ID
Total in drawer report
• 13 TAX
Tax report
155