Sharp UP-600 Instruction Manual page 194

Removing the journal paper roll
192
1.
Remove the printer cover.
2.
Press the
Area to cut
printed part is out of the way.
3.
Cut the paper and remove the take-up spool.
4.
Cut the paper behind the printer and near the paper roll.
5.
Press the
comes out completely.
6.
Remove the paper roll from the back of the printer.
NOTE
7.
Remove the outer side of the take-up spool as shown on
the left.
8.
Remove the printed journal roll from the take-up spool.
Ì
key to advance the journal paper until its
Ì
key until the paper remaining in the printer
Do not pull the paper through the printer.