Removing A Paper Jam - Sharp UP-600 Instruction Manual

Removing a paper jam

Precaution: Be very careful with the manual cutter, so as not to cut yourself. Never touch the print
head immediately after printing, because the head may still be hot.
1.
Remove the printer cover.
2.
Remove the receipt paper, and if the paper jam is at
journal paper, remove the journal paper, too.
3.
While pushing the tab, pull up the paper guide.
4.
Pull the print head release lever all the way forward
(after it stops at one position, continue pulling forward
until it stops again and cannot be pulled forward any
further).
5.
Remove the paper jam. Check for and remove any
shreds of paper that may remain in the printer.
6.
Return the print head release lever to its original
position.
7.
Return the paper guide to its original position. Make
sure the metal part is surely hooked to the tab.
8.
Pull all the
Reset the paper roll(s) correctly by following the steps in
way forward
"Installing the paper roll".
9.
Replace the printer cover.
193