Report Programming; Zero Skip - Sharp UP-600 Instruction Manual

Report Programming

Use the following procedure to select any option included in the report group:
Procedure
The following illustration shows those options included in the report programming group.
11 REPORT 1 0 SKIP
2 GNR RPT FORMAT
3 HOURLY RPT
4 STACKED RPT

Zero skip

You can program whether or not to skip "0" in each report.
Procedure
The screen continues.
• DEPARTMENT (Use the selective entry)
SKIP: Skips those data that are "0" in the department report.
NOT SKIP: Does not skip those data that are "0" in the department report.
• PLU/EAN (Use the selective entry)
SKIP: Skips those data that are "0" in the PLU/EAN report.
NOT SKIP: Does not skip those data that are "0" in the PLU/EAN report.
• HOURLY (Use the selective entry)
SKIP: Skips those data that are "0" in the hourly report.
NOT SKIP: Does not skip those data that are "0" in the hourly report.
1.
From the SETTING menu, select "11 REPORT."
• The REPORT menu will appear.
2.
Select any option from the following options list:
1 0 SKIP:
2 GNR RPT FORMAT:
3 HOURLY RPT:
4 STACKED RPT:
See "Zero skip" on page 153.
See "General report format" on page 154.
See "Hourly report" on page 154.
See "Stacked report" on page 155.
Program each item as follows:
• CLERK (Use the selective entry)
SKIP: Skips those data that are "0" in the clerk report.
NOT SKIP: Does not skip those data that are "0" in the clerk report.
• CASHIER (Use the selective entry)
SKIP: Skips those data that are "0" in the cashier report.
NOT SKIP: Does not skip those data that are "0" in the cashier report.
• TRANSACTION (Use the selective entry)
SKIP: Skips those data that are "0" in the transaction report.
NOT SKIP: Does not skip those data that are "0" in the transaction
report.
Zero skip
General report format
Hourly report
Stacked report
153