Cleaning The Print Head - Sharp UP-600 Instruction Manual

Cleaning the Print Head

When the printed text is getting dark or faint, paper dust may be stuck to the print head. Clean the print head
as follows:
Print head
194
1.
Turn the mode switch to the "
2.
Remove the printer cover.
3.
Remove the paper(s).
4.
While pushing the tab, pull up the paper guide.
5.
Pull the print head release lever all the way forward
(after it stops at one position, continue pulling forward
until it stops again and cannot be pulled forward any
further).
6.
Clean the print head with a soft rag moist with ethyl
alcohol or isopropyl alcohol.
7.
Return the print head release lever to its original position
immediately after cleaning.
8.
Return the paper guide to its original position. Make
sure the metal part is surely hooked to the tab.
9.
Reset the paper roll(s) correctly by following the step in
"Installing the paper roll".
10.
Replace the printer cover.
Precautions:
Never touch the print head with a tool or anything hard
as it may damage the head.
" position.