Programming; Basic Instructions; Programming Screen - Sharp UP-600 Instruction Manual

11

Programming

This chapter explains how to program various items.
Before you start programming, turn the mode switch to PGM1 or PGM2 depending on the item
you are going to program.

Basic Instructions

This section illustrates the basic programming by using an example of programming for departments.

Programming screen

Opening screen: When you turn the mode key to PGM1 or PGM2, your display will show a programming
opening screen corresponding to the mode you selected.
(In case of PGM2)
Code selecting screen (Dept. PLU/EAN, Customer):
Programming screen:
Mode you are in
Programming menu: Use the cursor keys or numeric key to select an
option, and press the
Numeric entry and status information area
Code title
Code number and its description
(In case of PLU/EAN and customer, two lines are used for one code, upper
line - code, lower line - description.)
Use the cursor keys or numeric keys to select an option, and press the
key. (When you select the last item, the screen goes to the selected option
screen without pressing the
Numeric entry and status information area
Selected menu message
Setting items:
Use the cursor keys to select an item.
To select an option, follow the instruction shown below.
Numeric entry: Use numeric keys
Character entry: Use character keys
Selective entry: Press
select it, or press the
the cursor keys to move the cursor and press the
to select it.
E
key.
E
key.)
.
key to toggle options and press the
s
key to show the option list. Use
PGM1 MODE
PGM2 MODE
E
E
key to
E
key
111