WLAN module
Description
WLAN RT 802.11 b/g/n +Bluetooth 4.0 1x1 SANJI
IMPORTANT:
and replacement.
Before removing the WLAN module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
components:
a.
Battery (see
b.
Optical drive dummy (see
c.
Hard drive (see
d.
Memory (see
Remove the WLAN module:
1.
Carefully disconnect 2 antenna cables (1).
28
Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Battery on page
Optical drive dummy on page
Hard drive on page
Memory on page
20), and then remove the following
22).
23).
25).
Spare part number
792505-855
22).