Wlan Module - HP 250R G9 Maintenance And Service Manual

2. Rotate the top of the battery upward (2), and then remove it from the computer (3).
To replace the battery, reverse the removal procedures.

WLAN module

To remove the WLAN module, use this procedure and illustration.
Table 5-3 WLAN module descriptions and part numbers
Description
Intel AX201 Wi-Fi 6 +Bluetooth 5.2 non-vPro
Realtek 8852BE Wi-Fi 6 Bluetooth 5.3 WLAN
WLAN module protective tape kit
IMPORTANT:
module authorized for use in the computer by the governmental agency that regulates wireless
devices in your country or region. If you replace the module and then receive a warning message,
remove the module to restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the WLAN module:
1. If tape covers the antenna connectors on the WLAN module, remove the tape.
34 Chapter 5 Removal and replacement procedures for authorized service provider parts
To prevent an unresponsive system, replace the wireless module only with a wireless
Bottom cover on page
Battery on page
Preparation for disassembly on page
31).
32).
Spare part number
L92724-005
N26166-005
N10779-001
31).