Webcam - HP Notebook 14 Maintenance And Service Manual

Webcam

Description
Webcam
IMPORTANT:
and replacement.
Before removing the webcam, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the base enclosure (see
components:
a. Battery (see
b. Optical drive dummy (see
c. Hard drive (see
d. Memory (see
e. WLAN module (see
f. Heat sink and fan (see
g. Speakers (see
h. Microphone (see
i. System board(see
j. WLAN cable (see
k. Display assembly (see
Remove the webcam:
▲ Lift the webcam board (1), disconnect the webcam cable (2), and then use a nylon flake tool to remove
the webcam (3).
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Battery on page
Optical drive dummy on page
Hard drive on page
Memory on page
WLAN module on page
Heat sink and fan on page
Speakers on page
Microphone on page
System board on page
WLAN cable on page
Display assembly on page
20), and then remove the following
22).
23).
25).
28).
30).
32).
34).
36).
39).
41).
Spare part number
854509-001
22).
Component replacement procedures 45