HP Notebook 14 Maintenance And Service Manual page 32

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the base enclosure (see
components:
a. Battery (see
b. Optical drive dummy (see
Remove the hard drive:
▲ Gently pull the hard drive horizontally (1), and then remove it (2).
Reverse this procedure to install the hard drive.
24 Chapter 5 Removal and replacement procedures for authorized service provider parts
Base enclosure on page
Battery on page 22).
Optical drive dummy on page
20), and then remove the following
22).