Timer Operation - Panasonic S-160PE1R5B Technical Data & Service Manual

8-23. Timer Operation

When setting the timer, make sure the current time on the remote controller is accurate.
The timer's clock can only be set when the display of the remote controller is ON.
After setting the timer, put the remote controller in a place where its signal will reach the
receiver of the indoor unit. (When the time set for the timer is reached, a signal is sent
from the remote controller to Start/Stop the unit.)
Using the Timer
1. Press either /
if you press
/
The time last set on the timer is displayed.
"--:--" indicates time to change the batteries.
2. Press either
/
Every time you press
If you press and hold the button, the time changes quickly.
3. After setting the timer, if you press
indicating settings are complete.
After the timer setting is displayed for three seconds, the display reverts to the current time.
Combining ON and OFF Timers
Setting the ON and OFF timers, respectively.
Checking the timer setting
If you press either
When no timer setting has been made, it displays --:--. (Initial Setting)
Changing a timer setting
Press /
for the
Canceling a timer setting
If you press [CANCEL], the timer setting is canceled.
If you wish to cancel the setting for either the
scheduled time is displayed.
Using the same timer setting every day
If you press for 2 or more seconds, "
every day.
If you press again for two seconds or more, "
8
of the or , and while the time is being displayed,
again, a scheduled time can be set.
or and set the timer to the desired time.
of the
, the time changes in 10 minute increments.
/
, the time you set changes to a steady display,
/ for the or the , the scheduled time is displayed for four seconds.
or the , and then when the timer setting is displayed, press
or the
" is displayed and the ON timer or the OFF timer will operate repeatedly
timer, press , and long-press [CANCEL] while
/
" goes off and the timer operates only one time.
8-20
3 1,2
/ for the timer again.