Panasonic S-160PE1R5B Technical Data & Service Manual page 233

Sensor Temperature Display Function
(displayed regardless of whether unit
is operating or stopped)
The procedure below displays the sensor
temperatures from the remote controller, indoor unit,
and outdoor unit on the remote controller.
<Procedure of CZ-RTC4>
1 Press and hold the
simultaneously for 4 seconds or longer.
2 The unit No. "X-X" (main unit No.), item code "
(sensor address), and servicing monitor "
(sensor temperature) are displayed on the remote
controller LCD display. (See Fig. 7-9 at right.)
3 Press the temperature setting
and select the item code to the address of the
sensor to monitor.
4 If group control is in effect, press the
to select the unit to monitor.
Press the temperature setting buttons to select the
item code to change.
5 Press the button to return to normal remote
controller display.
Item code
Indoor unit data 02
03
04
05
06
07
08
09
Outdoor unit data 0A
0b
0C
0d
0E
0F
10
11
12
13
14
15
16
19
* Depending on the model, some items may not be displayed.
and buttons
"
/ buttons
button
Indoor unit intake temp.
Indoor unit heat exchanger temp. (E1)
Indoor unit heat exchanger temp. (E2)
–
–
–
–
Discharge temp. (TD)
–
–
Intake temp. (TS)
Outdoor unit heat exchanger temp. (C1)
Outdoor unit heat exchanger temp. (C2)
–
Outdoor air temp. (TO)
–
Current value (CTL2)
Current value (CTL1)
Outdoor MV value (MOV1)
–
Frequency
A
"
3 4 5
Meaning of Code
7-19
1
Fig. 7-9
3
4
2
4
7