Panasonic S-160PE1R5B Technical Data & Service Manual page 247

Use [Emergency Operation]
When the remote controller's batteries have failed.
When the remote controller is broken.
When the remote controller is lost.
*See the following figures regarding Emergency button.
1. Press [Emergency Operation]
• The OPERATION lamp is lit.
• Auto operation starts. If Auto operation is not possible, the unit starts cooling if the room temperature at the
time is 24 °C or higher; otherwise, the unit starts heating.
• The operation stops if you press [Emergency Operation]
Note
• If non-cooling/heating free type is being used, it will beep twice and the operating lamp will light up on the
display; if the timer and standby lamps blink alternately, a conflict between the heating and cooling exists, so the
unit cannot operate in the desired mode. (On models that do not have an Auto function, even if Auto is selected,
it works in the same way.)
• When the local operation is disabled by a central control device or similar cause, and if the Start/Stop
speed , Flap
pressed, the unit will beep 5 times and the change will not be made.
CZ-RWSC3
CZ-RWRC3
Start/Stop
in the following situations when there is an urgent need.
of the receiver.
, Temperature setting
again.
/ , Mode select
8-11
or Energy saving button is
, Fan
8