Temperature Automatic Return - Panasonic S-160PE1R5B Technical Data & Service Manual

8-17. Temperature Automatic Return

You can restore the changed temperature to the originally set temperature automatically after a specified
time elapses.
• Set the time and temperature for each operation mode.
1. Press and
same time for 4 seconds or longer.
• " " starts blinking and the setting screen is displayed.
2. Press to select the operation mode, then press
• Every time you press
→ Heat → Auto
corresponding receiver.
• When not set: 1 short beep
• When already set: 2 short beeps
3. Press /
temperature.
• Setting range: 10 to 240 min (by the 10 min)
4. Press /
temperature, then press
Auto
Heat
Dry / Cool
• The temperature range that can be set varies depending on the model.
5. Press .
• You can return to Step 2 to continue setting if you press
Changing the setting
Perform Step 1 to 5 noted above as you did when setting.
Cancelling the setting
1. Press and
2. Press to select the operation mode, then press
• The receiver emits 1 short beep.
• Press for 10 seconds or longer to cancel settings for all operation modes.
Note
• Press to stop operation in the middle.
8
at the
to switch between "Dry
", the buzzer sounds from the
to set the time to return to the set
to set the
.
MAX (°C) MIN (°C)
27 17
30 16
30 18
at the same time for 4 seconds or longer.
Operation mode
.
/ Cool
1, 3
instead of
for 4 seconds or longer.
8-14
Temperature
.
Time
(min)
1, 4
2
2, 4
5