Auto External Static Pressure Setting Operation - Panasonic Inverter R32 Series Technical Data & Service Manual

Auto External Static Pressure Setting Operation

6. Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the LCD
display.
7. Press the or
If you wish to see the next screen instantly, press the
or button.
Select "4. Test run" on the LCD display and press the
button.
The "Test run" screen appears on the LCD display.
Change the display from OFF to ON by pressing the
or button. Then press the
The "Maintenance func" screen appears on the LCD
display.
8. Press the button. "TEST" will be displayed on the
LCD display.
, and buttons
button to see each menu.
button.
9. Press the
Test run setting mode screen appears on the LCD display.
10. Set the operation mode to "
" " by pressing the
or
The fan motor will be activated, the auto external static
pressure setting operation and setting-check operation will
be performed for about 3 to 30 minutes.
The fan speed will change automatically while these
operations are in progress. When these operations
completed, "TEST" will be disappeared from the LCD
display.
NOTE:
The auto external static pressure setting operation
and setting-check operation will not be performed
unless " (MODE FAN)" and "
SPEED)" have been selected.
11. Press the
The LCD display will be returned to the initial screen.
NOTE:
Failure to set this parameter may result in decreased
airflow and condensation.
1-7-5
button. Test run will be started.
" and fan speed mode to
or button or
button. Then press the
(FAN
button.
1
button.