Air-Flow Blocking Kit - Panasonic Inverter R32 Series Technical Data & Service Manual

■

Air-flow Blocking Kit

CZ-CFU3
Installation Instructions
Accessory parts
The accessory parts are required for the installation work so they should not be discarded until the work is
completed.
Part name
Air-flow blocker (470×65×T10)
A:2 A
B:1
Ｂ
Mounting procedure
(1) Checking where the air-flow blocker is to be attached
For Air outlet<1>
When Air-flow blocker A is to be attached, cut it in
parallel with the slit. (Fig. 1-11-7)
For Air outlet<2>
Air-flow blocker B can be used as is.
For Air outlet<3>or<4>
Air-flow blocker A can be used as is.
Cut off
Fig. 1-11-7
Double-sided tape
(2) Fit the air-flow blocker into place to match the shape of the air outlet,adhere the tape of the both side of air-flow blocker
to the drain pan and adhere the sealer on top to block the passage of air. (Fig. 1-11-8) (Fig. 1-11-9)
Fig. 1-11-8
Air-flow blocker
Fig. 1-11-8
Tape
Air-flow blocker
Double-sided tape
Air outlet
Air outlet
Drain pan (Sectional view)
(3) Adhere the sealer to the drain pan with an overlap of 10 mm or more.
(3) Adhere the sealer to the drain pan with an overlap of 10 mm or more.
(Condensation may form if it is adhered with no overlap.) (Fig. 1-11-10)
(Condensation may form if it is adhered with no overlap.) (Fig. 1-11-10)
・ Ensure that the sealer does not come into contact
Ensure that the sealer does not come into contact
*1
with the corner metal fitting.
with the corner metal fitting.
・ Fold the protruding parts of the sealer over the side
*2 Cut the sealer diagonally so that no contact is made
panel, and adhere them into place.
with the wire.
・ Cut the sealer diagonally so that no contact is made
Fold the protruding parts of the sealer over the side
with the wire.
panel, and adhere them into place.
Fig. 1-11-9 Fig. 1-11-9
Air outlet
Air outlet
Drain pan
(Sectional view)
Fig. 1-11-10
Fig. 1-11-10
Sealer
Sealer
a
a
(Top view)
Adjust the position of packing Please affix in accordance
and attach it so that "a" can be with the end of the drain pan.
10mm and more.
No. of
parts
Sealer (570×90×T2)
3
Air-flow blocker A
Air-flow blocker B
Tape
Double-sided tape
Drain pan
Drain pan
Sealer
Sealer
Drain pan
Air-flow blocker
Air-flow blocker
a
a
Drain pan
Drain pan
No. of
Part name
parts
2
Air outlet<4>
"nanoe"air outlet
Refrigerant
piping
<Layout of air outlets>
Double-sided
tape
Corner metal
<2>
Air-flow
blocker B
Sealer
<3>
1-11-65
No. of
Part name
parts
Installation instructions
Air outlet<3>
Air outlet<2>
Air outlet<1>
Drain
piping
Drain piping
Wire (*2)
Electrical
component box
<1>
Air-flow
<4>
blocker A
Sealer
1
1
Indoor unit
Refrigerant
piping
Air-flow
blocker A
Sealer