Polaris MATRIX INDY VR1 Series Owner's Manual page 30

SAFETY
CLUTCH WARNING/BELT REMOVAL
WARNING
Belt Removal – All Units
1. For electric reverse models, engine must be stopped in forward to allow
clutch opening.
2. Install L-wrench from fender into the open threaded hole in the driven clutch.
3. Turn the L-wrench clockwise to open the sheaves and replace the belt.
Return the L-wrench to the fender.
See Owner's Manual for sheave width adjustment procedure.
Recommended oil: VES Full Synthetic 2-Cycle Engine Oil or VES Extreme Full
Synthetic 2-Cycle Engine Oil.
Part Number: 7300329.
HOT SURFACE WARNING
The hot surface warning
WARNING
Hot Surface
Do Not Touch
Burns may result. Entire top of tunnel may be hot. Install only accessories
specifically approved for this model by POLARIS.
OPERATION WARNING
The operation warning label is located on the console.
Part Numbers: 7176779 (English), 7176780 (French Canadian).
WARNING
To avoid serious injury or death, read and understand all warnings and the
Owner's Manual before operation. If manual is missing, contact a POLARIS
dealer for a replacement.
28
q
is on the rear center of the tunnel.