Polaris MATRIX INDY VR1 Series Owner's Manual page 105

PIN ACTIVATED SECURITY SYSTEM (IF
EQUIPPED)
The P.A.S.S. feature must be activated by your dealer using Polaris Digital
Wrench. See your dealer for setup and activation.
The Pin Activated Security System (P.A.S.S.) allows you to safely lock and
unlock your vehicle from the Ride Command display screen.
ENABLE P.A.S.S.
1. Go the settings menu by pressing the Polaris button followed by the All
Settings button.
2. Select Vehicle Settings from the left toolbar.
3. Select Passcode Unlock.
4. If this your first time activating P.A.S.S. you will be prompted to enter a new
pin. Enter and verify new pin.
5. Turn off the vehicle using the key ignition switch.
After activating P.A.S.S. for the first time you must power down the vehicle and
allow the ECM fully shutdown before restarting. This may take up to three
DISABLE P.A.S.S.
1. Go the settings menu by pressing the Polaris button.
2. Select Vehicle Settings from the left toolbar.
3. Select Passcode Unlock.
4. Enter pin code to disable P.A.S.S.
RIDE COMMAND DISPLAY
NOTICE
NOTICE
minutes.
103