Polaris MATRIX INDY VR1 Series Owner's Manual page 155

OIL CHANGE (PUMP METHOD)
This procedure requires the use of a commercially available hand pump oil
1. Elevate the front of the snowmobile using a floor jack or appropriate lift.
2. Remove the fill plug
3. Insert the tube of a hand pump oil extractor into the fill hole. Direct the hose
toward the bottom front area of the cover, away from the chain/sprocket.
4. Extract the oil from the chaincase.
5. Lower the snowmobile.
6. Using a funnel, slowly add the recommended oil until the fluid begins to
overflow.
7. Clean the area with a clean, dry shop towel.
8. Reinstall the fill plug and torque to specification.
NOTICE
extractor.
q
. Clean all metal shavings off the plug.
FLUID CAPACITY
Engine Oil
10.5 oz (310 mL)
MAINTENANCE
153