Polaris MATRIX INDY VR1 Series Owner's Manual page 119

HANDLEBAR COMPONENT FASTENER
TORQUES
Moving a handlebar component without first loosening its screws/set screws
may cut grooves into the handlebar, making it difficult to secure the
component. Do not move a handlebar component without first loosening its
Take care to avoid damaging hand warmer/brake switch wires when moving
Brake Lever / Master Cylinder
q
Handlebar Clamp Screws/Bolts
w
Auxiliary Engine Stop Switch Set Screw
e
r Throttle Lever Block Cover Screws
t Throttle Lever Block Set Screw
y Left Hand Control Screw
mounting screws/set screws.
COMPONENT
IMPORTANT
components.
60-80 in-lbs (6.7-9 N·m)
35 in-lbs (4 N·m)
12 in-lbs (1.4 N·m)
6 in-lbs (0.7 N·m)
27 in-lbs (3 N·m)
20 in-lbs (2.3 N·m)
THE PERFECT FIT
TORQUE
DO NOT OVER-TIGHTEN
117