Polaris MATRIX INDY VR1 Series Owner's Manual page 115

FRONT TRACK SHOCK FACTORY CLICKER SETTINGS
MODEL
Matryx INDY VR1
Matryx INDY XC
Matryx Switchback Assault
REAR TRACK SHOCK SPRING SETTINGS
For riders who weigh 160-220 lbs. (73-100 kg), test ride at factory settings, then
make fine-tuning adjustments.
To reset clickers, rotate the clicker to full stiff, and then back off the same
number of clicks for each shock.
The rear track shock of your Matryx vehicle is equipped with a shock clicker. The
clicker will increase or decrease compression damping when adjusted.
• For a stiffer ride, turn the clicker clockwise to increase damping.
• For a softer ride, turn the clicker counterclockwise to decrease damping.
REAR TRACK SHOCK FACTORY CLICKER SETTINGS
MODEL
INDY VR1
INDY XC
Switchback Assault
THE PERFECT FIT
FACTORY CLICKER SETTING
(FROM FULL STIFF)
5
5
6
CLICKER SETTING (FROM FULL
STIFF)
6
5
6
113