Polaris MATRIX INDY VR1 Series Owner's Manual page 130

PRE-RIDE INSPECTIONS
BRAKES
Always check the following items for proper operation before starting the engine.
BRAKE LEVER TRAVEL
Squeeze the brake lever. It should
move no closer to the handgrip than 1/2
q
inch (1.3 cm) . A smaller distance
indicates low brake fluid level or air in
the hydraulic system. Refer to the brake
bleeding information on . Your dealer
can assist.
LEVER FEEL
If the brake lever feels "spongy" when squeezed, check the brake fluid level and
condition. Add fluid as needed. See the Brake Fluid section for details.
WARNING
Continued use of "spongy" brakes may cause a complete loss of brakes, which
could result in serious injury or death. Always have the brakes serviced at the
first sign of sponginess.
PARKING BRAKE LEVER LOCK
Use the parking brake lever lock only when you want the snowmobile to remain
stationary; for example, when parked on an incline for a period of five minutes or
less.
1. Brake Lever
2. Parking Brake Lever Lock
3. Master Cylinder Reservoir/Cover
LOCK ENGAGEMENT
To engage the lock, squeeze the brake lever tightly and push forward on the
lock. Hold the lock forward while releasing the brake lever.
128