Step 2 Lift up non-wooven tape.
Step 3 Remove Digital P.C.B. shield plate.
Step 4 Remove 2 screws on Main P.C.B.
Step 5 Remove 2 Main P.C.B. angles.
Step 6 Remove 1 screw on Digital P.C.B.
Step 7 Detach 18P FFC at the connector (P55002) on Digital
P.C.B..
Step 8 Detach 45P FFC at the connector (P55001) on Digital
P.C.B..
Step 9 Slightly push the iPod cradle unit in the direction of
arrow.
Step 10 Detach 13P FFC at the connector (P51000) on the
Digital P.C.B..
Step 11 Remove Digital P.C.B..
Caution: During assembling, ensure the Digital P.C.B. is
seated property at the locators.
9.15. Disassembly of D-Amp P.C.B.
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 13) of Item 9.13.
Step 1 Remove 3 screws at the rear panel.
Step 2 Release the tab of the rear panel in the direction of
arrow.
51