Disassembly Of Ipod Cradle Assembly - Panasonic SA-BT235P Service Manual

10.10.2. Assembly of Cradle Lid
Caution: During assembling, replace Cradle Lid Damper if
broken. Ensure it is properly pasted & fully pressed onto
Cradle Lid.
Step 1 Insert the Cradle Lid (Shaft A) into the Front Panel (Slot
A & hole B).
Step 2 Slightly push the Cradle Lid inwards.
Step 3 Press the Cradle Lid downward.
Step 4 Fix the Cradle Lid Spring onto Cradle Lid's Shaft A.
10.11. Disassembly of iPod Cradle
Assembly
• Refer to "Disassembly of Front Panel Block Assemb-
ley".
Step 1 Detach 15P FFC at the connector (CN1002) on iPod/
51