Terms And Conditions; Manufacturer's Liability - Emerson Keystone EPI2 63 Installation, Operation And Maintenance Manual

Section 1: General Safety Instructions
October 2020
Keystone EPI2 electric actuators are designed in accordance with the applicable
international rules and specifications, but the following regulations must be observed in
any case:
•
•
•
•
•
•
WARNING
!
The electronic parts of the Keystone EPI2 and all the optional modules can be damaged
by a discharge of static electricity. Before you start, touch a grounded metal surface to
discharge any static electricity.
1.2

Terms and Conditions

Emerson guarantees each single product to be free from defects and to conform to
current goods specifications. The warranty period is one year from the date of installation
by the first user, or eighteen months from the date of shipment to the first user,
whichever occurs first.
No warranty is given for products which have been subject to improper storage, improper
installation, misuse, or corrosion, or which have been modified or repaired by unauthorized
personnel. Repair work due to improper use will be charged at standard rates.
1.3

Manufacturer's Liability

Emerson declines all liability in the event of:
•
•
•
•
2
The general and safety regulations
The plant specific regulations and requirements
The proper use of personal and protective devices (glasses, clothing, gloves, etc.)
The proper use of tools, lifting and transport equipment
Electrical installation, use and maintenance on Keystone EPI2 has to be carried out
in accordance with the National Legislation and statutory requirement related to
the safe use of Keystone EPI2 actuators, applicable to the site of installation
Should further information and guidance related to the safe use of Keystone EPI2
actuators is requested, please contact Emerson
Use of the actuator in contravention of local safety at work legislation
Incorrect installation, disregard or incorrect application of the instructions
provided on the actuator nameplate and in this manual
Modifications without Emerson's authorization
Work done on the unit by unqualified or unsuitable persons
Installation, Operation and Maintenance Manual
MAN-10-04-100-0711-EN Rev. 0
General Safety Instructions