Back Up Using Ftp; Back Up Using Tftp; Figure 10-2 Receive File; Figure 10-3 Successful Backup - ZyXEL Communications P-202 User Manual

Step 4.
Enter where you want to place the rom configuration file on your computer, give it a suitable
name, e.g.p1600.rom, and make sure you choose the X-Modem Protocol. Then press "Receive".
Step 5. After a successful backup you will see the following screen. Press any key to return to the SMT
menu
** Backup Configuration completed. OK.
### Hit any key to continue .###

10.1.2 Back up using FTP

To transfer the firmware and the configuration file, follow the procedure below:
Step 1.
Launch the FTP client on your workstation.
Step 2.
Type open and the IP address of your Prestige. Then type root and your SMT password as
requested.
Step 3.
Locate the "rom-spt" file.
Step 4.
Type get rom-spt to backup the current Prestige configuration to your workstation.
For details on FTP commands, please consult the documentation of your FTP client program.

10.1.3 Back up using TFTP

Even though TFTP should work over WAN as well, it is not recommended.
To use TFTP, your workstation must have both telnet and TFTP clients.
To transfer the configuration file, follow the procedure below:
10-2
Enter where you want to place
the rom configuration file on
your computer.

Figure 10-2 Receive File

Figure 10-3 Successful Backup

Prestige 201 ISDN Access Router
Choose the
X-Modem
Protocol.
Backup, Restore and Upload