Prestige 201 ISDN Access Router
Follow the instructions in the following table on how to configure the DHCP fields.
Field
Description
DHCP Setup
DHCP= This field enables/disables the DHCP server. If it is set to
Server, your Prestige will act as a DHCP server. If set to None,
the DHCP server will be disabled. If set to Relay, the Prestige
acts as a surrogate DHCP server and relays requests and
responses between the remote server and the clients.
When DHCP is used, the following four items need to be set:
Client IP Pool
This field specifies the first of the contiguous addresses in the IP
Starting Address
address pool.
Size of Client IP
This field specifies the size, or count, of the IP address pool.
Pool
Primary DNS
Enter the IP addresses of the DNS servers. The DNS servers
Server
are passed to the DHCP clients along with the IP address and
the subnet mask.
Secondary
DNS Server
Remote DHCP
If Relay is selected in the DHCP= field above, then enter the IP
Server
address of the actual, remote DHCP server here.
Internet Access
Table 3-1 DHCP Ethernet Setup Menu Fields
Example
None
Server (default)
Relay
192.168.1.33
32
3-5