Figure 2-13 Configuration Example - ZyXEL Communications P-202 User Manual

Prestige 201 ISDN Access Router
The following figure illustrates the configuration used in this example.
RVS-COM lite
Before entering any configurations, you must install the CAPI driver (RVS-CE) and communication program
such as RVS-COM Lite on your workstation.
Installing the CAPI driver and Communication Software
[Note: Please uninstall previous versions of "RVS-CAPI" and "RVS-COM lite" before you install the new
versions. You may use the Windows "START | Settings | Control Panel | Add/Remove Programs" to uninstall
RVS-CAPI and RVS-COM.]
To install the CAPI driver and the communication software, enter one of the license keys of your RVS-COM
Lite CD-ROM and follow the instructions on the configuration wizard. When you install RVS-Lite, RVS-
COM AUTOMATICALLY installs CAPI driver before installing RVS-Lite.
Note: If you did not install RVS-Lite and want to use other programs such as AVM Fritz to access the ISDN
router, you must first install the CAPI driver - RVS-CE using the English version installation wizard (in
\DISKs\CEPE\DISK1\) and start the SETUP.EXE.
Configuring NetCAPI
Toggle the [Spacebar] to select Yes in Edit NetCAPI Setup field in Menu 2 and press [ENTER] to go to
Menu 2.2 - NetCAPI Setup.
Hardware Installation & Initial Setup
Prestige
192.168.1.33 192.168.1.1
RVS-CE NetCAPI

Figure 2-13 Configuration Example

ISDN
2-15