2.10 ISDN Setup Menus
Menu 2 is for you to enter the information about your ISDN line. Different telephone companies deploy
different types of switches for ISDN service. Depending on the switch for your particular installation, you
will have a different number of telephone numbers.
2.10.1 ISDN Setup Menu
The only switch type supported in Europe is DSS-1.
Press Space Bar to Toggle.
Field
Switch Type
B Channel Usage
2-10
Switch Type: DSS-1
B Channel Usage= Switch/Switch
ISDN Data
=
Edit Advanced Setup = No
Edit NetCAPI Setup = No
Press ENTER to Confirm or ESC to Cancel:
Figure 2-9 Menu 2 – ISDN Setup
If your switch type is not currently shown, press the space bar to change to the
next switch; repeat until you see the correct switch type. The majority of switches
run NI-1; if the link LED does not come up, try NI-1.
The Prestige will not be able to place or to receive calls if the wrong switch type
is specified. If you are not sure, contact your telephone company to confirm the
exact switch type.
In general, this will be Switch/Switch (the default). If you are only using one B
channel (e.g., your Prestige is sharing the ISDN BRI line with another device),
then select Switch/Unused. If your second B channel is a leased line, select
Switch/Leased. Press the [Space bar] to toggle through all the options. These
options are
Switch/Switch
Switch/Leased
Leased/Switch
Menu 2 - ISDN Setup
Description
Leased/Unused
Unused/Leased
Leased/Leased
Hardware Installation & Initial Setup
Prestige 201 ISDN Access Router
Switch/Unused